Motorcycle speedometer repair costs depend on the motorcycle and also depending on the type of speedometer you use, an average cost of a speedometer repair service is between $80 to $250.
In most cases – labor will be the only expense along with the purchase of a new needle… which normally costs around $20-$25 depending on where you get it from.
Speedometers are one of the least serviced items on motorcycles and cars although they play a very crucial role. They tell you how fast you’re going and whether or not you have reached your target speed. What many do not know is that faulty readings may cause problems such as engine light errors, inaccurate fuel gauge reading, and erroneous odometer readings. These parts also wear out over time and should be checked every 2-3 years
A motorcycle speedometer repair cost is going to vary depending on what type of fault your unit has. If you have a loose or damaged wiring connection then you can just purchase a new speedo cable from any reputable motorcycle parts store and replace it yourself as part of a larger service job. In this case, the only additional item that will be required is a replacement gasket for the fairing panel where you removed the old unit from.
Table of Contents
How Does A Speedometer Work?
The speedometer in a car calculates the vehicle’s speed by measuring how fast the wheels turn. sensors mounted on the front wheel of the bike send square waves signal to the ECU. By measuring how long it takes for each echo to return, the onboard computer can determine how far away objects are and how fast they are moving relative to the car or bike. A computer is then able to calculate your speed based on that information.
While mechanical speedometers usually have a maximum measurement between 100-180 km/h, electronic speedometers support speeds over (200 km/h).
A computer in the bike calculates your current speed and displays it in large, easy-to-read numerals on a screen located somewhere on or near the handlebars.
Why Doesn’t the Speedometer Work?
There are several reasons that could cause the speedometer not to work properly.
The most common is that the cable that links the front wheel to the bike’s internal computer has come loose.
The second could be a faulty sensor located inside the front wheel. This can happen after you have taken your bike for a service and don’t remember to tell the mechanic that the speedometer is not working properly.
In the third instance, you might have a damaged wire in your front wheel that is shorting out. This can happen whenever there is a crash or someone cuts the wire cable.
The fourth cause of a faulty speedometer could be a problem with the actual speedometer itself. This can happen because it has been mishandled or broken during an accident that involved the wheel.
If you are sure that there is nothing wrong with the cable or sensor but your speedometer still doesn’t work, contact your local bike shop. The problem might be due to an issue with another component of your bike instead of being directly linked to the speedometer itself.
What to do if the speedometer is not working?
If you are not sure what the problem with your speedometer is, park the bike securely and take a look at it. If you notice anything that looks like debris or dirt on or around the cable, clean it off so that it doesn’t interfere with its rotation.
If nothing seems out of place but your speedometer still won’t work, you can try testing it with a multimeter or checking for any loose cables in the front wheel.
If none of these methods work, you will have to take your motorcycle into a local bike shop and let them diagnose the problem. Generally, a mechanic should be able to tell what is causing the fault with your speedometer in less than 5 minutes.
Is it safe to drive when the speedometer is broken?
It is not safe to drive your motorcycle with a faulty speedometer because it can result in an accident. Instead, you need to pull over and stop the bike as soon as possible. If the speedometer appears to be malfunctioning but still works, compare its reading to that of other cars on the road or signs set up by traffic authorities.
What can cause a speedometer to stop working?
Speedometer cables are some of the most common types of damage that result from accidents involving motorcycles. If you are involved in an accident, you should have your bike checked by a professional mechanic.
It is especially important to get this done if there was any visible damage to your front wheel because it could be the cause for the speedometer malfunctioning as well.
It is also possible for the cable to break or snap if you are riding your motorcycle on rough roads or over large bumps. The first thing that you need to do in this case is to stop riding and check for any damage on the cable itself. If it appears to be okay, try using other methods of determining your speed.
Can a mechanic fix a speedometer?
Yes. a mechanic can fix a speedometer. If your speedometer is not working, you can take it to a mechanic who will be able to determine the fault within minutes. The mechanic will need to open up the front wheel, detach the old speedometer unit and attach a new one in its place. If possible, it will repair the speedometer.
Conclusion:
The motorcycle speedometer displays the vehicle’s speed while measuring, recording, and displaying it. It can be either manual or electronic. If your speedometer is not working properly, it might be due to faulty wiring or an issue with one of its components. You should take your bike to a mechanic who will diagnose the problem. which will cost from 80$ to 250$.
If you can’t afford it, better sell the bike cheap at 400$ than get in trouble. hhhhhhh
I hope you can fix it, good luck !!
Comment if this article helped you in any way.
Please share it or leave a comment below. Thank You! =)
also read: Side Effects Of Motorcycle Riding