How To Clean Aluminum Motorcycle Parts

The aluminum motorcycle parts are subject to corrosion and oxidation. This can be caused by environmental conditions or material defects. In this blog post, we’ll go over 5 ways you can clean your aluminum motorcycle parts in order to remove any corrosion and oxidation that has occurred.

You may find some of these methods more effective than others depending on the severity of the issue you’re facing, so it’s always a good idea to try a few different remedies before settling for one specific method.

1) Use vinegar-based household cleaners: Vinegar is acidic, which makes it perfect for removing rust from metal surfaces because it interacts with iron ions and converts them into iron phosphate (a harmless substance). It also helps break down oil residue left by gasoline spills or others.


Aluminum parts can be made to look new with a few simple steps. First, make sure you check how dirty it is. If this is dirty, then just rinse off any residue of dirt or grease using water (but if there’s some stubborn gunk – like paint- use something stronger). When done, thoroughly dry them clean with a rag that has no detergent in it because soap will erode away at the surface coating which makes aluminum prone to corrosion over time.


If any dirt is still visible on the surface of your aircraft-grade aluminum after you’ve cleaned it with soap and water, make sure to use a professional cleaner like Simple Green Oxy Solve Concrete and Driveway Pressure Washer Cleaner, that won’t harm the metal. These cleaners have been tested for safety and will get through tough grease build-ups without harming your aluminum so you can enjoy its beauty again.


It’s time to shine your aluminum with a soft wire brush. Not only will this make the surface look brighter, but it also cleans off any dirt or debris that may have been lodged in between parts of the metal before now. Use gentle strokes and work slowly to not scrub too hard on sensitive areas like corners which can easily become scratched if you’re not careful. Let’s learn how to remove oxidation from these precious metals and get them shining again.

Remove Oxidation/Rust From Aluminum Motorcycle Parts

1. Cleaning Aluminum Motorcycle Parts

To clean oxidized aluminum parts, first, wash with hot water for a few minutes. If you want to remove stubborn stains from the surface of the aluminum part, use strong jets of water and scrub gently by using any combination of abrasive material such as soap on soft bristles or scratchy pads.

2. Clean with Natural Cleaners

Dirty aluminum parts can be a bummer, but luckily there are many natural ways to clean them. You could try using vinegar which is cheap and easy. First, you will need 2 teaspoons of vinegar for every quart (or liter) of water that’s boiling on the stovetop in about 15 minutes.

After it has boiled for 15 minutes add your dirty part and soak it with this solution until all dirt disappears or bubbles start forming around the object – usually 5-10 minutes should do it.
the other most familiar household items that you can use to clean rust use lemon juice and salt.

For a more intense cleaning, mix vinegar with your favorite citrus fruit such as lemons or oranges. To get rid of stubborn stains on areas like metal trimmings in just one application soak them for 15 minutes then scrub gently using toothpaste or baking soda before wiping off with water only if necessary.

3. Clean with Oxidation Removal Product

If you’re not happy with what’s happened to your aluminum parts so far, it might be time for an oxidation removal product. This one has a chemical that reacts with the rust and removes all of those pesky spots in no time.

When you want to remove oxidation from aluminum parts You should wear gloves, and then apply a certified cleaner and then rub the surface with a clean cloth. This is one of many ways to get rid of oxidation on aluminum parts.

Meguiar’s M4916 Marine/RV Heavy Duty Oxidation Remover

Meguiar’s M9132 Marine/RV Power Cut Compound

You can use these products to remove oxidation from aluminum and clean your aluminum motorcycle parts. 

Aluminum is a great metal for many uses, but when it comes to maintaining its luster and integrity, there are some things that need to be done. 

For example, after cleaning the aluminum surface you will want to apply a transparent layer on top of it so corrosion doesn’t take over. This helps protect your aluminum from oxidizing or going rusty if left unprotected in an environment with high humidity like Florida’s natural rainforest climate where I live! You can also use automotive wax as well which again keeps oxidation at bay by creating this protective one-way barrier between moisture droplets and the metal itself; thereby preserving your beautiful new clean car shine all year long without any problems whatsoever.

How do you clean oxidized aluminum motorcycle parts?

Cleaning oxidized aluminum is pretty easy – just use a metal cleaner. However, when cleaning oxidized copper, cleaning can be difficult, especially for beginners. If you don’t know how to clean oxidized copper parts properly, then you need to hire someone experienced in this field. The following video will guide you on the best way to clean oxidized copper motorcycle parts:


Aluminum is a lightweight, malleable substance that can be used to create durable goods. The following are some simple tips for cleaning aluminum: 1) Aluminum oxidizes and tarnishes more easily than other metals so it must always be well-maintained. Cleaning should never involve abrasive materials like steel wool or sandpaper – these will remove oxidation but also leave scratches on the surface of your metal. 2) Soap water with dishwashing liquid works best as detergent since it’s mild enough not to damage any part of the material. First clean by hand then rinse off in warm water until there’s no soap left behind; this typically takes between 30 seconds and one minute depending on how dirty they were before you started.