I was at a party the other night, and I got to talking with this guy about Motorcycles. He told me that he had a Kawasaki Ninja, but he didn’t have the key to start it. I told him I could show him how to do it without the key. this is the exact same method I used to start his Kawasaki ninja without a key
Here’s How You Start a Kawasaki Ninja Without a Key:
1. Sit on the motorcycle and make sure it’s in neutral: This is important because if the motorcycle is in gear, it could lurch forward and injure you.
2. Find the two wires that go to the solenoid and disconnect them: One wire will be black and the other will be red.
3. Use a screwdriver or pliers to touch the two wires together: Doing this will bypass the solenoid and send power directly to the starter motor.
4. Hold the wires together until the engine starts: Once the engine starts, let go of the wires and ride off.
The motorcycle should start right up! If it doesn’t, check your connections and make sure the wires are touching.
Once the motorcycle is running, you can reconnect the wires to the solenoid.
Starting a Kawasaki Ninja without a key is easy if you know what to do. With just a screwdriver or a set of pliers, you can get your motorcycle running in no time. So next time you’re at a party and someone tells you they can’t start their Kawasaki Ninja because they don’t have the key, you’ll be able to help them out.
This method should work on most Kawasaki Ninjas, but if it doesn’t, you may need to consult your owner’s manual.
Can You Start a Motorcycle with a Screwdriver?
You can start a motorcycle with a screwdriver by touching the positive and negative terminals of the battery with the screwdriver. This will create a spark and start the engine. the screwdriver trick is a popular method for starting motorcycles without keys, but it’s not the only way.
Another way to start a motorcycle without a key is by using a bump key. A bump key is a specially cut key that can be inserted into the ignition lock and turned to start the engine. This method requires no special skills or knowledge, and any bump key can be used to start any motorcycle.
The last way to start a motorcycle without a key is by hot-wiring the ignition. This method requires some knowledge of electrical systems, but it’s not difficult to learn. Hot-wiring the ignition bypasses the need for a key entirely and is the most surefire way to start a motorcycle without a key.
No matter which method you choose, starting a motorcycle without a key is a simple process that anyone can do. So next time you lose your keys, don’t panic! You can still get your bike up and running.
How Do You Break an Ignition with a Screwdriver?
The best way to break an ignition with a screwdriver is to use a hammer. First, find the sweet spot on the ignition where the screwdriver will have the most impact. Then, take a few practice swings to get a feel for the motion. When you’re ready, swing the screwdriver as hard as you can against the ignition. The force of the blow will break the ignition and allow you to start the motorcycle without a key.
How Do You Drill Out a Motorcycle Ignition?
To drill out a motorcycle ignition, you’ll need a drill and a 1/2-inch drill bit. First, find the center of the ignition lock cylinder. Then, put the tip of the drill bit on the center mark and start drilling. Keep drilling until the drill bit breaks through the back of the lock cylinder. Once you’ve drilled
The best way to drill out a motorcycle ignition is to use a power drill. First, find the sweet spot on the ignition where the drill bit will have the most impact. Then, start drilling slowly, making sure not to overheat the drill bit. Once the hole is big enough, you can insert a screwdriver or another tool to break the ignition and allow you to start the motorcycle without a key.
How Do I Replace My Lost Kawasaki Motorcycle Key?
If you have lost your Kawasaki motorcycle key, the first thing you should do is contact a Kawasaki dealer. They will be able to provide you with a replacement key and may even be able to program it to match your existing key. If you cannot find a Kawasaki dealer, you can also try a locksmith. However, locksmiths may not be able to program the key to match your existing key. In this case, you will need to order a new key from Kawasaki.
How Much Does It Cost to Replace a Lost Kawasaki Motorcycle Key?
If you need to replace a lost Kawasaki motorcycle key, the cost will vary depending on the dealer or locksmith you use. However, the average cost of a replacement key is around $100. You may also need to pay for key programming, which can add an additional $50 to the cost. the best way to avoid these costs is to keep a spare key in a safe place so that you never have to worry about losing your original key.
Starting a motorcycle without a key can be done in several ways, depending on your level of expertise and knowledge. The most surefire way to start a motorcycle without a key is by hot-wiring the ignition, but this method requires some electrical knowledge. If you don’t feel comfortable hot-wiring the ignition, you can try using a bump key or drilling out the ignition. No matter which method you choose, starting a motorcycle without a key is a simple process that anyone can do. So next time you lose your keys, don’t panic! You can still get your bike up and running.
I hope you learned something new today from this post but you do please share the article with your friends and family members.