How to Waterproof Motorcycle Boots

Today, many people wear motorcycle boots. They are great for protection and style. However, they can get very hard to clean with all the mud and grime that accumulate on them during a ride! This article will tell you how to waterproof your motorcycle boots so you don’t have this problem.

Waterproofing Motorcycle Boots

The first step is to make sure your motorcycle boots are clean. This is very important, as any dirt or grease on the boots will prevent the waterproofing from working properly. You can clean them with a damp cloth, or if they are really dirty, you can use a little bit of soap and water.

Once they are clean, you can move on to the next step: waterproofing them. To do this, you will need an electric hand dryer and a spray bottle of water and vinegar solution (equal parts water and white vinegar).

You should remove the laces from your boots before proceeding to prevent getting wet. Then take your spray bottle and thoroughly moisten the entire exterior surface of the boot with a waterproofing solution.

Next, use the electric hand dryer to heat up the surface of the boots and help the waterproofing solution to penetrate into the material. Hold the dryer about 12 inches away from the boots and dry them for about 30 seconds on each side.

If you used a spray bottle, be sure to shake it up before spraying more of the waterproofing solution on the boots. If you used a soaking container, fill it with some more water and vinegar solution and let your boots sit in this for about 10 minutes. Then take them out and dry as before.

You should repeat this process until all of the exterior surfaces of your boots are thoroughly wet from both applications of the cleaning solution and drying from the electric hand dryer. Once this is done, use an old towel or rag to wipe off any leftover dirt on the exterior surface of your boot.

This will basically prepare your boot for its final step: adding a protective wax coating that will keep raindrops from penetrating into your boot.

To do this, you will need a small piece of cotton cloth and some wax shoe polish. Take the cloth and rub it in one direction against the edge of the bottle of wax polish so that it is covered with a thin layer of wax.

Next, take your boots by the heel and use your fingers to spread out the toe area so that you can easily reach inside with your rag. Now apply firm pressure to the boots near their top edge where most of the grime usually accumulates. While pressing down on this area, run your rag back and forth for about 20 seconds to ensure thorough coverage with wax before rubbing off any excess with another rag.

Repeat this process until all parts of each boot have been treated with wax. Now put your laces back in, and you’re done! Your boots will now be waterproof and much easier to clean.

also, Silicone spray is the best and the easiest way to waterproof your boots and it can be bought at any hardware store.

Waterproofing your motorcycle boots is an essential step in keeping them looking good and performing well. By following the steps in this article, you can be sure that your boots will be protected and you will be able to use them for many more rides.

Also Read: Are Doc Martens Good Motorcycle Boots

Do Waterproofing Boots Really Work For Motorcycle Riding?

The answer to this question is yes, waterproofing boots do work for motorcycle riding. However, it’s better to buy boots that are already waterproof rather than trying to waterproof your own boots. If you do choose to waterproof your own boots.

I recommend buying waterproof boots rather than making them waterproofed because it is a more sure way to make sure that water will not enter the boots.

how to waterproof motorcycle boots

Conclusion:

Waterproofing your motorcycle boots is an essential step in keeping them looking good and performing well. By following the steps in this article, you can be sure that your boots will be protected and you will be able to use them for many more rides. Silicone spray is the best and the easiest way to waterproof your boots, and it can be bought at any hardware store.

Thanks for reading! Feel free to leave any questions or comments in the section below.

Leave a Comment